Dust Seal Tape for Multiwall Polycarbonate 33m


Product Information

Protects the open edges of Multiwall Polycarbonate sheets. Self adhesive to stick on to the sheet, with fine perforation to allow any residual moisture to escape.

Use U Profile to cover and protect the Dust Seal Tape at the foot of the roof fall.


The Sunwood Range of Timber Supported Products is a branded system of powdercoated aluminium and PVCU Conservatory Roof component parts for anyone building a timber conservatory, whatever the design or specification, for 10mm Twinwall, 16mm Triplewall or 25mm Sixwall Polycarbonate Sheets.

Comprising a screw-down aluminium base, with a snap-on uPVC cap in either White or Brown to give controlled pressure on the sheet and a watertight seal.

Support RequirementsPVCu Rafter Bars are designed to sit on timber joists 75mm x 50mm (3" x 2") or larger and they must be supported along their full length. Do not use with cross-purlin support only.

Standard Rafter Bars: accept a sheet on either side

Roof Edge infills are for use on the outside edges: fit the sheet on one side only, with a curved cover on to the outside fascia or butting to a wall.

Ordering: For each roof you will need one more Rafter Bar than the number of roof sheets. Example for a roof with 5 Multiwall sheets you would need 6 Rafter Bars and 2 Roof Edge infils.



Ask a question about this product